One of the best powerful metal / steel cutting machines in the market is our automatic T315Y metal cutting machine with an hydropneumatic movement of the cutting process without to use manpower. A metal cutting saw is essentially a circular saw that is mounted on an arm that pivots, creating the ability for greater stability and more accurate cuts. A chop saw that is used to cut wood is called a miter saw and a chop saw that is used to cut metal and other hard material like concrete or brick is called a chop saw. Other terms that are used interchangeably are an abrasive saw, metal chop saw, abrasive chop saw or a cut-off saw. The biggest advantage of the chop saw is that it comes with an abrasive disc instead of a blade. This disk has no teeth allowing it to cut through very hard material like steel, rebar, or cast iron. The chop saw is to metal workers what the miter saw is to woodworkers. An essential tool for cutting, building or framing with solid, non-wood materials.
We considered the top abrasive powerful metal cutting machine on the market. We completed a thorough evaluation and the T315 Y out from its competitors as the saw to beat. It is heavyweight with a powerful motor with two different R.P.M speed turning of the sawblade. One for steel profiles with high thickness and the faster one for steel profiles with low thickness. Able to tackle steel and rebar with ease. It also includes safety features like the guard spark diversion and a secure lock off which prevents unexpected starts. The Baertec provides the highest quality at this price point of any chop saw on the market. It has a 315 mm diametre sawblade and an oiling process during the cutting process. The mechanism is working with a transmission in oil like a car motor. The highest quality industrial electric motors with 2 years guarantee can turn with 3000 and 3600 R.P.M. The sawblade can turn with 2 different leveles by only with 45 R.P.M and 90 R.P.M. The most important feature of the machine is the cutting result trace material on the steel profiles. So it is not needed to make a grinding or sanding process on the profiles again.